It’s the bleak midwinter, and most of my House Over Head budget is still going to doors. The upstairs bedrooms need new closet doors—boring but necessary. So I can’t make big, high-impact changes, but I’m feeling the need to make some kind of change. My tables have been the focus of this energy lately. The most recent subject is our old oak coffee table.
I’ve grown tired of it, but my biggest beef with it is that it’s realy tall for a coffee table. This is the table in front of the television, so it’s basically a glorified footrest. And it doesn’t make sense to upgrade to a nicer coffee table right now. My kids jump off it onto the couch all the time. They dance on it, flip it over and pretend it’s a pirate ship, and flip it back over and play like it’s a diving board. So I was just looking to tweak it. I wanted to make it less tiresome-looking and adjust it to a more comfortable height.
So, a few weeks ago, I—very carefully—cut about a inch and a half off each leg with my mitre saw. Don’t try this at home. I turned it on its side and propped it up against the workbench in my garage. I built a stable base for the leg I wasn’t trimming and then did my best to make sure it would remain stable while I made my cut. I would yell at my husband if I saw him attempting this. But, even though it sounds risky, I’m pretty paranoid about safety, especially while using high-powered saws, so it was never actually risky.
It’s now about 16 and a half inches tall. Crazy that such a small amount makes much of a difference, but it does.
After I addressed the function, I focused on form. I saw this desk while flipping through a Pottery Barn catalog. It’s part of their Dawson collection. The lines of the piece look a bit like my humble table, and I really like the weathered black finish. I wanted to pump up the contrast between the table and the couch. I had an almost-full can of black Rust-Oleum spray paint in semi-gloss in the garage. Normally, I wouldn’t want the shiny finish for a weathered look, but since I was going to give it a weathered look, I didn’t think it would matter much.
I sanded it before I painted it. I also hit it a few times with a hammer. Most of the distressing was done by my children naturally over time, but I added a few more dents for good measure.
As soon as I painted it, I was seriously questioning my decision. It looked like an extremely beat up LACK table from IKEA — not a good look for a table that projects a rustic vibe. Remember this post from last week on the creative process? This was stage 3.
It took much longer to sand it than to paint it. I used a really fine sanding paper, and just kept going over it and wiping it down. After I got it to a good place, I wiped it down with antiquing glaze. I did this more for a protective coat than for an extra antiqued look. It also helped even out the sheen from the roughed-up semi-gloss paint.
The brown blocks on the table are what I cut off the legs.
Here is one more after picture.
In one afternoon, I was able to tweak this piece to make it work better for us, improve its look, and keep the winter blues away. Win-win-win.